Part Numbers:
MLEPS120-24V - MEMOLUB EPS Model 120cc
MLEPS240-24V - MEMOLUB EPS Model 240cc
MLEPS480-24V - MEMOLUB EPS Model 480cc
Lubricant cartridges sold separately
How to order your MEMOLUB® EPS lubricator - click here .pdf
The MEMOLUB® EPS lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.
All MEMOLUB® EPS models use the same motor base assembly, making it easy to convert from one lubricant capacity to another by simply purchasing a low cost transparent housing kit.
Connecting Power to the EPS
The MEMOLUB® EPS is supplied with a 12" wire lead that is connected to an external power source. A constant 24VDC power is supplied during periods of machine operation and will continue to follow the program until power is removed. When initial power is supplied to the MEMOLUB® EPS lubricator it will cycle once and then follow the preset MEMO program. When power is turned off the lubrication cycle stops until power is reestablished.
Programming the MEMO System for use with the MEMOLUB® EPS
The MEMOLUB® EPS lubricant output is programmed using the simple MEMO system. It consists of a brass MEMO fitting, a black plastic timing-ring holder, and three plastic timing rings (one white, one red, and one black). The MEMO can be programmed to control both the frequency of lube cycles and the volume of lubricant discharged. Once the MEMO is programmed and installed any MEMOLUB® EPS lubricator will recognize the settings.
Basic Frequency Settings
There are 7 basic frequency settings that are suitable for most industrial applications. They are programmed by installing one or a combination of the three colored timing rings into the ring holder attached to the brass fitting. When you screw the MEMOLUB® lubricator onto the brass fitting, the timing rings depress the switches on the bottom of the lubricator. This activates the lubricator program.
Adjusting the Volume of Lubricant
Included in the MEMO kit is eight spacer washers for adjusting the amount of lubricant discharged per lube cycle. Installing one, or a combination of all eight washers, into the brass MEMO fitting will limit the stroke length of the piston inside the lubricator.Product Resources:
Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.
Case Study No. 1003 Application: Food processing Industry: Food & Beverage Issue: Unreliable manual lubrication with dangerous access. Solution: Installed four Mega Model240 PLCD lubricators each with an 8-Point progressive distribution block. |
||
|
---|
Product Description | Item Number | |
---|---|---|
|
IPMLLBK-2 | |
|
See MEMOLUB Replacement Kits page | |
|
IPM-DCSM-1 | |
|
OPEPS110AC5V2A | |
|
OPEPS110AC5V2A2-RS | |
|
See Pre-filled Tubing Data Sheet | |
|