Memolubs are decentralized lubricators for Conveyors, Cranes, Crushers, Pumps, Elevators, Lifts, Trains and Hoists, Industrial Robots, Rollers and Drive Assemblies, Fans and Blowers, Motors and Generators, Chains and Rails, Food Processing Equipment and more!
Memolubs solve lubrication challenges in virtually all industries from Automobile manufacturing to Mining and every thing in between.
Call our helpful Power Lube Industrial staff and we’ll work with you to determine the best lubricator model and offer you many lubricant options for your application. We stock over 200 of the most commonly used lubricants.
Part Numbers:
MLHPS120 - MEMOLUB HPS Model 120cc
MLHPS240 - MEMOLUB HPS Model 240cc
MLHPS480 - MEMOLUB HPS Model 480cc
Lubricant cartridges & battery packs sold separately
The MEMOLUB® HPS single point lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.
All MEMOLUB HPS models use the same motor base assembly, making it easy to convert from one lubricant capacity to another by simply purchasing a low cost transparent housing kit.
Simple MEMO Programming
The MEMOLUB® HPS daily lubricant output is programmed using the simple MEMO system. The MEMO can be programmed to control both the frequency of lube cycles and the volume of lubricant discharged. Once the MEMO is programmed and installed any MEMOLUB® HPS lubricator will recognize the settings.
Colored timing rings | Strokes per day | CC's per stroke | Daily output in CC's | Model 120 months to empty | Model 240 months to empty | Model 480 months to empty | |
---|---|---|---|---|---|---|---|
R
W
B
|
24 | 0.63 | 15.1 | N/A | 0.5 | 1 | |
R
W
|
12 | 0.63 | 7.6 | 0.5 | 1 | 2 | |
R
B
|
4 | 0.63 | 2.5 | 1.5 | 3 | 6 | |
R
|
2 | 0.63 | 1.3 | 3 | 6 | 12 | |
W
B
|
1.5 | 0.63 | 1 | 4 | 8 | 16 | |
W
|
1 | 0.63 | 0.6 | 6 | 12 | 24 | |
B
|
0.5* | 0.63 | 0.3 | 12 | 24 | N/A | |
* Lubrication cycles every other day (48 hours) |
Basic Frequency Settings
There are 7 basic frequency settings that are suitable for most industrial applications. They are programmed by installing one or a combination of the three colored timing rings into the ring holder attached to the brass fitting. When you screw the MEMOLUB® lubricator onto the brass fitting, the timing rings depress the switches on the bottom of the lubricator. This activates the lubricator program.
Adjusting the Volume of Lubricant
Included in the MEMO kit is eight spacer washers for adjusting the amount of lubricant discharged per lube cycle. Installing one, or a combination of all eight washers, into the brass MEMO fitting will limit the stroke length of the piston inside the lubricator.Product Resources:
Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.
Case Study No. 601 Application: Steel Processing Industry: Steel, Aluminum, Glass & Plastic Issue: Six single-point lubricators could not generate enough pressure to overcome the back pressure from the machine. As a result, lubricant rarely reached the slides. Solution: The six lubricators were replaced with 1 MEMOLUB 6-point lubrication system, using the customer's existing lines. The 350psi output pressure was more than enough to reach the slides. The need to service only one lubricator, versus six, proved to be an added cost benefit. |
||
|
---|
Product Description | Item Number | |
---|---|---|
|
IPMLLBK-2 | |
|
See MEMOLUB Replacement Kits page | |
|
IPM-DCSM-1 | |
|
See Pre-filled Tubing Data Sheet | |
|