The MEMOLUB® MPS-04 (Multi-Point System) is a precise, reliable, and easy to install system that can lubricate 4 lube points with one lubricator.
All of the materials required are available to quickly put your MEMOLUB® HPS lubricator to profitable use in a multi-point application.
Purchase prefilled nylon tubing and make installation as simple as "Plug 'n Lube"
How to order your Multi-Point System .pdf
How to order your Plug 'n Lube pre-filled nylon tubing .pdf
The MPS-04 System consists of a MEMOLUB® high pressure lubricator, a distribution valve which meters the lubricant to all lube points, a mounting bracket and push-in tube fittings for your bearings.
All MEMOLUB® MPS systems have been primed before shipment and are ready for use. On first installation of the MPS system, all lube lines and bearings should be pre-charged with the same lubricant that was ordered with the MEMOLUB® lubricator (prefilled tubing is available and sold separately).
This system is especially suited for applications with several lube points in close proximity.
Grease or Oil:
There are two system types available; one for grease applications and one for oil applications. When ordering, be certain to specify the system appropriate for your application.
Memolub MPS Resouces:
Memolub Multi-Point System Distribution Block Set-up Guide .pdf
Memolub Multi-Point System Technical Data Sheet .pdf
Optional Parts:
Protective Cover: To protect your MEMOLUB® lubricator in harsher evironments we offer a nylon protective cover. This cover is sold seperately and is available for all three size lubricators.
Prefilled Nylon Tubing: Nylon tubing required to complete the installation is sold separately. The standard size tubing is 5/16” OD, but other sizes are available. Tubing can be purchased two ways; pre-filled in 5 foot increments from 5 to 30 feet, or empty in any length from 1 to 100 feet.
Contact us to learn more about the easy-to-use, effective GREASOMATIC lubricator.
Case Study No. 402 Application: Cranes & Hoists Industry: Steel, Aluminum, Glass & Plastic Issue: Difficult access to the runway and dangerous conditions resulted in infrequent manual lubrication of the runway rails. Wheel flanges and sections of rail were severly damaged and in need of replacement. Solution: A MEMOLUB 2-Point Splitter System with a Model 480 lubricator was mounted on each side of the bridge, and lines were run to a grease applicator under the girders to coat both sides of the runway rail. Each lubricator is accessible from the catwalk for easy and convenient cartridge changeout, twice a year. |
||
|
---|
Product Description | Item Number | |
---|---|---|
![]() |
|
IPMLLBK-2 |
![]() |
|
See MEMOLUB Replacement Kits page |
![]() |
|
IPM-DCSM-1 |
![]() |
|
See Pre-filled Tubing Data Sheet |
|