The MEMOLUB® MPS-12 (Multi-Point System) is a precise, reliable, and easy to install system that can lubricate 12 lube points with one lubricator.
All of the materials required are available to quickly put your MEMOLUB® HPS lubricator to profitable use in a multi-point application.
Purchase prefilled nylon tubing and make installation as simple as "Plug 'n Lube"
How to order your Multi-Point System .pdf
How to order your Plug 'n Lube pre-filled nylon tubing .pdf
The MPS-12 System consists of a MEMOLUB® high pressure lubricator, a distribution valve which meters the lubricant to all lube points, a mounting bracket and push-in tube fittings for your bearings.
All MEMOLUB® MPS systems have been primed before shipment and are ready for use. On first installation of the MPS system, all lube lines and bearings should be pre-charged with the same lubricant that was ordered with the MEMOLUB® lubricator (prefilled tubing is available and sold separately).
This system is especially suited for applications with several lube points in close proximity.
Grease or Oil:
There are two system types available; one for grease applications and one for oil applications. When ordering, be certain to specify the system appropriate for your application.
Memolub MPS Resouces:
Memolub Multi-Point System Distribution Block Set-up Guide .pdf
Memolub Multi-Point System Technical Data Sheet .pdf
Optional Parts:
Protective Cover: To protect your MEMOLUB® lubricator in harsher evironments we offer a nylon protective cover. This cover is sold seperately and is available for all three size lubricators.
Prefilled Nylon Tubing: Nylon tubing required to complete the installation is sold separately. The standard size tubing is 5/16” OD, but other sizes are available. Tubing can be purchased two ways; pre-filled in 5 foot increments from 5 to 30 feet, or empty in any length from 1 to 100 feet.
Contact us to learn more about the easy-to-use, effective GREASOMATIC lubricator.
Case Study No. 407-1 Application: Pumps Industry: Steel, Aluminum, Glass & Plastic Issue: Manual lubrication of both pump and motor. High rate of mechanical failures due to over or under lubrication. Abnormal level of vibration. Solution: Installation of 2 MEOMLUB HPS Gigas on the pump with a 1 year setting. Installation of 2 MEMOLUB HPS Megas on the motor bearing with a 1 year setting. Vibration levels decreased and increased reliabilty. |
||
|
---|
Product Description | Item Number | |
---|---|---|
|
IPMLLBK-2 | |
|
See MEMOLUB Replacement Kits page | |
|
IPM-DCSM-1 | |
|
See Pre-filled Tubing Data Sheet | |
|